Repair
Cost
We provide transparent, labor-based pricing for all riders. Our rates reflect the bench-time required to diagnose and repair your vehicle properly.
Note: Rates cover labor, and parts are quoted separately. You can supply your own components, or we can help source them. Not sure what's wrong? Start with a technical diagnostic. We'll quote the repair once we've found the fault.
Tire Replacement Cost
View full service details →Pneumatic Tire/Tube Replacement
$50.00 - $85.00Replace worn or punctured air-filled tires and tubes for eBikes and eScooters, restoring proper grip and ride comfort.
Solid Tire Replacement
$60.00 - $120.00Swap out worn or cracked solid (airless) tires, which require additional labor to remove and press-fit.
Flat Repair (Patch Only)
$40.00 - $50.00Quick puncture repair for pneumatic tires without full tube or tire replacement, when the damage allows it.
Battery Repair Cost
View full service details →Battery Diagnostic & Testing
$85.00 - $125.00Full analysis of your battery's health, voltage balance, and capacity to detect faults, weak cells, or BMS failure.
BMS Replacement
$95.00 - $145.00Replace the Battery Management System (BMS) to restore charging control and protect your battery cells.
Battery Rebuild (Cell Replacement)
Starting at $350.00Rebuild your eBike or eScooter battery with high-quality replacement cells for extended range and power.
Battery Connector & Wiring Repair
$45.00 - $95.00Repair or replace damaged connectors, charge ports, or battery wiring to ensure reliable power delivery.
Battery Installation
$65.00 - $85.00Professional installation of replacement or upgraded batteries with safety testing and performance check.
Brake Maintenance Cost
View full service details →Brake Adjustment
$25.00 - $35.00 /brakeEnsure optimal stopping power and eliminate rotor rub with precision mechanical or hydraulic calibration.
Brake Pad Replacement
$25.00 - $35.00 /brakeReplace worn-out brake pads for enhanced braking performance and safe stopping power.
Hydraulic Brake Bleeding
$35.00 - $65.00 /brakeRestore hydraulic brake systems with professional fluid purging and pressure rebalancing.
Hydraulic Brake Installation
$55.00 - $65.00 /brakeComplete installation and setup of hydraulic brake systems for smooth and efficient performance.
Electric Bike Service Cost
View full service details →eBike Electronic Diagnostics
$95.00 - $150.00Comprehensive diagnostic service identifying controller, motor, or sensor faults to restore peak performance.
eBike Controller Swap
$55.00 - $125.00Efficient motor controller replacement and wiring to ensure smooth and reliable power delivery.
Install Bar/Stem
$75.00 - $85.00Precise installation of handlebars and stems to enhance rider comfort, control, and ergonomics.
Electric Scooter Service Cost
View full service details →eScooter Electronic Diagnostics
$95.00 - $135.00Technical diagnostic service to identify and resolve error codes, throttle issues, and system failures.
eScooter Controller Swap
$55.00 - $120.00Professional replacement of your scooter's controller to ensure smooth motor performance and acceleration.
Handlebar Swap
$55.00 - $65.00Precise installation of new handlebars to enhance comfort and control for an improved riding experience.
Hub Motor Repair Cost
View full service details →Hall Sensor Replacement
$150.00 - $250.00Restore motor feedback accuracy with precise hall sensor replacement, solving motor jitter or startup failures.
Hub Motor Inspection & Diagnostic
$75.00 - $115.00Full teardown to identify burned wiring, seized bearings, water damage, or internal motor shorts.
Hub Motor Rewiring
$95.00 - $145.00Rewire damaged phase wires, hall sensor lines, or connector terminals for safe motor operation.
eBike Planetary Gear Replacement
$140.00 - $220.00Replace stripped or worn nylon planetary gears to restore torque and eliminate grinding noise from geared hub motors.
Hub Motor Removal & Installation
$55.00 - $95.00Professional removal and reinstallation of hub motors, including cable routing and torque checks.
Rates
Hourly Labor Rate
$105.00 / hourFor custom technical projects, complex wiring, and performance builds. Estimates are provided before work begins. Rates are subject to change.
Custom Estimates
Have a unique performance build or a specialized repair? We provide transparent, labor-based quotes for all complex micromobility projects.
Request a QuoteBay Area Quality
Professional Repairs
Riders choose EVE MODS because we treat every micro-mobility vehicle like a high-performance machine. We provide the technical depth required for modern electric systems.
Transparent Pricing
Itemized quotes after diagnostics, with your approval before any work begins.
Diagnostics First
In-depth system analysis and troubleshooting before any repair, so the quote reflects the actual fault.
Quality Components
When we supply parts, we use quality cells and components chosen for long-term reliability.
Local Workshop
A Burlingame workshop serving the Peninsula, with reviews from local riders on Google.
Prices
FAQs
Transparent pricing and service fee structures for professional micromobility repair
Our prices mainly cover labor and diagnostics. Most repairs require customers to supply parts, though we can help source certain components. Any additional parts or costs will be approved by you before work begins.
Yes. After diagnostics, we give a transparent, itemized quote before starting any work. You’ll know exactly what labor and parts costs are, so there are no surprises.
Battery services vary by type and complexity. Diagnostics range $85–$125, BMS replacements $95–$145, and full cell rebuilds start at $350. Final pricing depends on battery size and components.
Controller swaps are $55–$125 and hub motor inspections are $75–$115. Hub motor rewiring is $95–$145, hall sensor replacement is $150–$250, and planetary gear replacement is $140–$220. Unusual or complex work is billed at $105 per hour, and exact costs are confirmed before work begins.
Some components differ, but our labor pricing is generally consistent across eBikes and eScooters. Pricing depends mostly on the repair type and parts needed.
No. We provide transparent pricing and approval before any additional work. The only variable is the cost of parts, which you approve in advance.
Prices may change only if additional issues are discovered during diagnostics. Any changes are communicated and approved before additional work is performed.
Pneumatic tire or tube replacement is $50–$85, solid tire replacement is $60–$120, and a patch-only flat repair is $40–$50 when the damage allows it. Labor includes removal and installation.
Brake adjustments and brake pad replacements are $25–$35 per brake. Hydraulic brake bleeding is $35–$65 per brake and hydraulic brake installation is $55–$65 per brake, depending on complexity.
Minor differences may exist due to wheel size or brake type, but labor pricing is generally consistent. Exact costs are provided after inspecting your bike or scooter.